SEBO ET-2 35 ft Pigtail Kit Review

Specifications

"Not yet verified" means the manufacturer has not published the figure or we could not confirm it. We never fill a gap with a guess; our own measurements are added once a unit has been tested hands-on.

The short version

Who this kit is for

This kit is for a home with low-voltage inlets and a wall outlet near each one, whose owner wants a SEBO ET-2 electric powerhead without rewiring for direct-connect inlets. The pigtail hose plugs into the existing inlet and takes 120V from the wall outlet through a short cord. The ET-2 itself is a German-made head with a fully published spec sheet.

The catch is the kit. The head is SEBO; the hose, wand and tools are assembled by an unnamed party, and the record could not confirm what ships for this exact listing.

What the specs tell you

SEBO publishes the ET-2’s figures: 15 in head width with a 13 in cleaning path, a 200 W motor drawing 1.8 A, a 2,700 rpm brush, 4 manual height levels, a 180-degree swivel neck, 5.7 lb, a toothed belt with electronic overload protection, and no headlight. A 13 in path on a 15 in head is wide coverage. Two hundred watts and 2,700 rpm are the kind of numbers most heads do not publish at all; they tell you the brush is driven by its own motor, not by airflow, so it will not slow when the bag fills. Overload protection cuts the motor if the brush jams rather than burning the belt.

Four manual height levels let you set it for bare floor through deep pile. The absence of a headlight is the one feature gap.

The kit’s specs are mostly unknown: hose diameter, wand type, tool list and hose sock are typical but unconfirmed.

Fit and compatibility

The hose is a 35 ft pigtail electric hose. Its wall end fits a standard low-voltage inlet, and its pigtail cord plugs into a nearby 120V wall outlet; the handle switch then controls the unit and the head. The ET-2 is powered through an electric wand, SEBO #6272CA, or via adapter #2780AM to another electric wand. You do not need direct-connect inlets, but you do need a wall outlet within cord reach of every inlet you will use.

It will not work on an air-only inlet with no low-voltage contacts, and it is unnecessary if you already have direct-connect electric inlets, which can take a direct-connect hose instead.

What’s in the box, and what you still need

Unconfirmed for this listing. The record notes a typical kit of this type includes the electric hose, an electric telescopic wand, 4 to 6 tools, a hose hanger and a hose sock. Get the itemized list from the seller. You need a power unit and low-voltage inlets with outlets nearby. Order a spare belt once you identify it.

Warranty and support

Retailers cite 5 years and 10 years inconsistently, so the record carries no term. SEBO America is the head’s US arm; no support URL is on file and SEBO’s stance on marketplace purchases is unknown. The kit assembler is not identified, so the hose and tools may carry a different warranty from the head. Get both in writing.

Living with it

The ET-2’s overload protection will stop the brush if it jams; clear the brush roll and it resets. Set the height to the lowest level that lets the brush spin freely. The pigtail cord means a short extra step at each inlet. Hang the hose on its hanger and use the sock, if included, to protect furniture.

What we’d verify before buying

• Kit contents for this exact listing: unconfirmed.
• Kit assembler: not identified.
• Warranty: 5 or 10 years depending on retailer; head and kit may differ.
• Hose diameter and wand type: not recorded.
• Which electric wand or adapter ships with it (#6272CA or #2780AM).
• That every inlet you will use has a wall outlet within pigtail reach.

What's in the box, and what you still need

Most power units ship without a hose or powerhead. Our attachments guide explains which hose fits your inlets.